HD210 83AL
FULL SURFACE 83" ALUMINUM
$225.00 EACH

HD210 83DU
FULL SURFACE 83" DURO
$262.00 EACH

HD157 83AL
FULL SURFACE CENTER PIVOT 83" AL
$225.00 EACH

HD157 83DU
FULL SURFACE CENTER PIVOT 83" DU
$262.00 EACH

• • Medium/Heavy Duty Closer
• • Ideally suited for commercial use
• • Cast aluminum body
• • Adjustable Size 1 - 6
• • Size1 meets ADA requirement
• • Tri-packed (regular, top jamb, and parallel arm mount)
• • UL/cUL listed
• • BHMA Certified ANSI A156.4 Grade 1 to 2,000,000 cycles
• • Three valves regulate closing, latching speed and back check.
• • Optional Plastic Cover
• • Finishes | Aluminum (AL), Bronze (DU), Black (BLK)
• • Footprint | Height: 1-3/4" (44mm), Width: 9-5/8" (244mm)
• • Projection | 2-3/4" (70mm)

• • Grade 2 Standard Duty Closer
• • Ideally suited for suite entry doors and light commercial
• • Cast aluminum body
• • Tri-packed (regular, top jamb, and parallel arm mount)
• • UL/cUL listed
• • BHMA Certified ANSI A156.4
• • Two valves regulate closing and latching speed
• • Finishes | Aluminum (AL), Bronze (DU), Brass (PB)
• • Footprint | Height: 1-5/8" (41mm), Width: 7-1/8" (181mm)
• • Projection | 2-3/8" (60mm)

• • Heavy Duty Closer
• • Suitable for educational, healthcare, main entrances and other high traffic application where maximum control of the door is required
• • Adjustable Size 1 - 8
• • DA (Delayed Action) and BC (Back check) - Standard
• • Four valves regulate closing latching speed, delayed action & back check
• • Tri-packed (regular, top jamb and parallel arm mount)
• • Track arm, hold open and cush n stop available
• • Non-handed
• • Plastic Cover - Standard
• • Warranty - 20 years
• • Finishes | Aluminum (AL), Bronze (DU), Black (BLK)
• • Optional Steel cover finishes include C32D and C26

• • UL 10C listed - Positive pressure fire tests of door assemblies
• • CAN/ULC-S133 listed - Door closers intended for use with swinging doors
• • BHMA certified ANSI A156.4 Grade 1 to 1,500,000 cycles
• • Approved to be used for ANSI/NFPA 80 fire rated opening up to and including 3 hr
• • Size 1 conforms to ADA requirement

Note: Hold open feature is not suited for fire rated door application

CAUTION: Door Closers for Low Opening Force Applications:
Door closers installed in openings required to meet the requirements of the Americans With Disabilities Act or ANSI/BHMA Standard A117.1, when adjusted to meet those requirements, may not provide adequate closing power to dependably close and latch the door.

• • Footprint | Height: 3-1/2" (89mm), Width: 12-1/4" (311mm)
• • Projection | 2-1/4" (57mm)
  
• See template for the hole dimensions